iVAC Pro Blast Gates
Not sure what you need? Just send us a message and let us know how we can help—we’re here for you!
iVAC Pro automated blast gates make dust collection easy and efficient. They’re wireless, powered, programmable, and can be controlled in three ways:
- Fully Automatic: When the power tool is turned on, the iVAC Pro Tool Plus or iVAC Pro Tool Advantage sends a wireless signal instructing the iVAC Pro Switch to turn on the Dust Collector, and this same signal is used to instruct the blast gate to open. When the power tool turns off it instructs the blast gate to close and the dust collector to turn off.
- Remote Control: Use an iVAC Pro Remote to open or close the gate and or turn on/off your dust collector (with proper dust collector controller).
- MWR Wired Switch: A toggle switch can also control the gate.
Installation is simple. Each gate uses a 115V UL/CSA approved AC adapter.
Available sizes:
- 4″ metal with a plastic enclosure
- 4″ all metal
- 6″ all metal
New: Optional 5″ flange adapters for 6″ gates
New: Optional 2 ½” adapter for shop-vac hose or clear plastic pipe for our 4” metal with
plastic enclosure
Installation is straightforward and each blast gate is powered from a 115Vac UL/CSA approved AC adaptor.
You can choose from 4″ plastic, 4″ metal or 6″ metal blast gate versions. The metal versions are typically used where fireproof materials are required in critical ducting paths.
Features:
- Three control options: automatic, remote, or wired
- Large collars for easy hookup
- Self-cleaning slide
- Open/Closed indicator
- Motor overload protection
- UL/CSA approved power adapter
- “Always Open” safety feature
- All metal versions for critical areas
Note: To protect the dust collector and your ductwork, at least one gate should always remain open. The iVAC Pro system includes an “Always Open” setting to ensure this, using a special tool address and switch setting.